General] Tab - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

-
If the disk resources are created from the virtual storage (RAID group, for example) that is the subject of ETERNUS Dynamic
LUN Mirroring, the LUN created on the remote site receives the same alias.
-
If the alias name of the ETERNUS LUN corresponding to the disk created from the virtual storage has been changed using the
ETERNUS WebGUI, the alias name in the disk details will be updated with the regular update. The disk resource name is not
changed.

16.2.1 [General] Tab

Name (Label)
Enter a name for the L-Server.
Enter up to 64 characters beginning with an alphanumeric character (upper or lower case), and including alphanumeric characters
(upper or lower case), underscores ("_"), or hyphens ("-").
Destination folder
Select a resource folder or a tenant to store L-Servers.
Template
Specify [None] in the selection list.
Server type
Enter the type of server for the L-Server to be created.
Select [Physical].
Image
Specify a cloning image to deploy.
a.
Click <Select>.
The [Select a Cloning Image] dialog is displayed.
b.
Select the cloning image to deploy to the L-Server, specifying [Deploy] in [Image deployment].
The available cloning images are displayed in the selection list.
Specifying [Do not deploy] in [Image deployment] will create an empty server without an operating system installed.
Note
When using a Windows image for multiple languages (English/Japanese Language Pack), manually select the language version when
deploying the cloning image.
Resource allocation
When creating an L-Server for which only a configuration definition exists, check the [None (Definition only)] checkbox.
When allocating resources for an L-Server for which only a configuration definition was created, refer to
Resources".
Network (NIC)
If "None" is specified in "Template" and the server type is specified, the <Add> and <Delete> buttons are displayed.
Clicking <Add> adds a network. Perform settings based on the physical server the L-Server will be located on.
Clicking <Delete> deletes the network in the last line of the list.
When [Physical] is selected for the server type, the admin LAN network resource is automatically configured if the admin LAN network
settings for all physical servers registered in a server pool are the same. When the admin LAN network settings for physical servers
differ, specify the correct NICs for the admin LAN or public LAN, and the network resources of the destination for connection.
When not using the public LAN, select "not connected".
- 172 -
"17.8.2.1 Allocating