Allocating And Releasing Resources To L-Servers - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

Note
Do not start the VM guest before deleting it. When the migrated VM guest is also operating on the migration target VM host,
the L-Server disk data may be damaged as the VM guest will be mounted twice.
b.
Release maintenance mode.
c.
Use the virsh command to delete the VM guest definitions. [KVM]
For details on the virsh command, refer to the Command Reference of the following RHEL-KVM manual.
Red Hat Enterprise Linux 6 Virtualization Administration Guide
15.1. virsh command quick reference
URL: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/6/html/
Virtualization_Administration_Guide/index.html

17.8 Allocating and Releasing Resources to L-Servers

This section explains how to allocate resources to, and release resources from, L-Servers.
Even if there are no resources to allocate to L-Servers, flexible configuration and operation, such as creating only L-Server definitions in
advance, is possible.
[Solaris Zones]
When a virtual machine created on a VM host not managed with server management software is linked to an L-Server, "Allocating and
Releasing Resources to L-Servers" is set according to the value of the definition file. After linking a virtual machine to an L-Server, it
cannot be modified.
For details on definition files, refer to
[OVM for SPARC]
When a virtual machine is linked to an L-Server, "Allocating and Releasing Resources to L-Servers" is set according to the value of the
definition file. After linking a virtual machine to an L-Server, it cannot be modified.
For details on definition files, refer to
Configure the following settings, when creating an L-Server.
-
Create an L-Server definition
If only creating an L-Server definition, configure "None (Definition only)", when creating an L-Server.
For details, refer to "16.2.1 [General]
Only IP addresses/MAC addresses/WWNs are allocated to the created L-Server, and "[defined]" is displayed.
-
Automatically release server resources for L-Servers
If releasing server resources when the L-Server is turned off, set [Resource release] during L-Server creation.
For details, refer to "16.2.2 [Server]
When the power of an L-Server for which this setting is configured is turned off, "[preserved]" is displayed.
Note
When sharing resources on the same physical server between L-Servers using the usage change function, set [Resource release] on
the L-Server where the server resource is allocated.
When the server resources are allocated to the L-Server for which [Resource release] is not configured, the server resources cannot
be shared.
"17.8.1 Installation".
"17.8.1 Installation".
Tab" and "16.3.1 [General]
Tab" and "16.3.2 [Server]
- 224 -
Tab".
Tab".