Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 291

Popup Menu
Menu
Registration Settings
HBA address rename settings (*2)
Modify
Network Settings (*3, *4)
Spare Server Settings (*2)
Set
Maintenance Mode
Release
ON
OFF
OFF (Forced)
Power
Reboot
Reboot (Forced)
ON
LED (*3)
OFF
Hardware
Re-configure
Maintenance
Backup/Restore Restore
Cloning Deploy
Console Screen (*5) -
External Management
-
Software (*6)
Export (*7) Environmental Data
Move to Folder -
*1: Available only for PRIMERGY BX series and PRIMEQUEST servers.
*2: Available only for VM hosts when using PRIMEQUEST.
*3: Available only for PRIMERGY BX servers.
*4: Available only for VM guests.
*5: For physical L-Servers, when opening the L-Server console screen at the second time or later, a window for iRMC management may
be opened instead of the console screen. If an iRMC management screen is displayed, close that screen and then start the console screen
again.
*6: Available only for PRIMERGY series, PRIMEQUEST, and SPARC Enterprise M series servers.
*7: This option is only available for chassis equipped with power monitoring capabilities.
Table A.5 Popup Menus Available for Physical OSs [Physical Servers], VM Hosts, and VM Guests
Popup Menu
Menu
Delete (*1) -
Update -
HBA address rename settings (*3, *4)
Modify (*1, *2)
Submenu
Submenu
Deletes a physical OS or VM host.
Updates a physical OS, VM host, or VM guest.
Modifies the HBA address rename settings of a server.
- 275 -
Function
Modifies a server's registration settings.
Modifies the HBA address rename settings of a server.
Modifies the network settings of a server.
Modifies a server's recovery settings.
Places a server into maintenance mode.
Sets a server to active mode.
Powers on a server.
Powers off a server after shutting down its operating
system.
Powers off a server without shutting down its operating
system.
Reboots a server after shutting down its operating
system.
Reboots a server without shutting down its operating
system.
Turns the maintenance LED on.
Turns the maintenance LED off.
Detects and reconfigures the properties of a replaced
server.
Restores a system image to a server.
Deploys a cloning image to a server.
Opens the server console.
Opens external server management software.
Exports environmental data collected from servers.
Moves a server to another folder.
Function