Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 378

product_name
Enter the model of the LAN switch blade. Note that if a hyphen ("-") is entered, it is treated as "BX600 GbE Switch Blade 30/12".
One of the following models can be entered.
-
PY CB Eth Switch/IBP 1Gb 36/12
-
PY CB Eth Switch/IBP 1Gb 36/8+2
-
PY CB Eth Switch/IBP 1Gb 18/6
-
PY CB Eth Switch/IBP 10Gb 18/8
-
PY CB DCB SW 10Gb 18/6/6
-
BX600 GbE Switch Blade 30/12
-
PRIMERGY BX600 GbE Switch 16/2x10Gb
-
PRIMERGY BX600 GbE Switch 16x1Gb
-
Cisco Catalyst Blade Switch 3040
connection_type
Enter the connection method to use for the LAN switch blade.
If you configure "ssh" for a LAN switch blade which does not support SSH, or specify a character string other than ssh, the
configuration is regarded as "telnet".
If "PY CB DCB SW 10Gb 18/6/6" is specified for the product name (product_name) and connection_type is specified as a character
string other than telnet, the configuration is regarded as being "ssh".
-
For telnet
"telnet"
-
For SSH
"ssh"
VLAN Data for LAN Switch Blades
-
Section Name
Enter [LanSwitchNet] as the section name.
-
Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
chassis_name
Enter the chassis name (the value of "chassis_name" in the [Chassis] section).
port_no
Enter the port number of an external LAN switch blade port. Enter numeric characters. The port number that can be specified is
different depending on the model type.
For details, refer to the manual of the LAN switch blade to be used.
vlan_id (optional)
Enter the VLAN ID and tag type ("/T" for tagged or "/U" for untagged) to be assigned to the specified LAN switch blade port.
Enter a VLAN ID followed by tag types. To specify multiple VLAN IDs, separate each set of VLAN settings using semicolons
(";"). Both tagged ("/T") and untagged ("/U") VLAN IDs can be used together, but only one untagged ("/U") type is allowed.
- 362 -