Server] Tab - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual
For infrastructure administrators (resource management) windows/linux
Hide thumbs
Also See for ServerView Resource Orchestrator Cloud Edition V3.1.0:
- User manual (247 pages)
Table of Contents
Advertisement
Note
-
When the admin LAN network settings for a physical server registered in a server pool are different, an admin LAN network
resource is automatically registered, if a physical server is selected for use in the [Server] tab.
Also, if an admin LAN network resource is specified for the NIC in [Network (NIC)], when [Physical server] is selected on the
[Server] tab, only a physical server or server pool with a NIC configuration matching that of the admin LAN network will be
displayed.
For details, refer to
-
When performing NIC redundancy, configure the settings by switching over to the [Network] tab.
For details, refer to
Label (Optional)
Enter a label for the L-Server.
Enter a maximum of 32 characters.
Comment (Optional)
Enter any comments for the L-Server.
Enter a maximum of 256 characters.
16.2.2 [Server] Tab
Server Specification Methods
Select a method to specify a server.
Click <Model> to select a model name to allocate to the L-Server.
Clicking <CPU and Memory> enables you to enter the number of CPUs, CPU performance, and memory size of the server allocated
to the L-Server.
Note
When <CPU and Memory> is selected, you must enter the number of CPUs, the CPU performance, and the memory size.
Number of CPUs
Enter the number of server CPUs to allocate to the L-Server. Enter an integer between 1 and 240.
CPU Performance
Enter the server CPU speed to allocate to the L-Server. Enter a number with up to one decimal place, in units of gigahertz. Values
between 0.1 and 10 can be specified.
Memory Size
Enter the memory capacity to allocate to the L-Server. Enter a number with up to one decimal place, in units of gigabytes. Values
between 0.1 and 8192 can be specified.
Specifications
The specifications of the physical server are displayed.
When [Automatic] or [Pool] is selected for [Physical server], a hyphen ("-") will be displayed in each parameter.
Physical server
Select the physical server to allocate to the L-Server.
Clicking <Select> displays the [Select a Server Resource] dialog.
Select one of [Automatic], [Pool], or [Server] in [Resource type].
"16.2.2 [Server]
Tab".
"16.2.4 [Network]
Tab".
- 173 -
Advertisement
Table of Contents
