Registering Bmc Bladelogic Server Automation - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

5.12 Registering BMC BladeLogic Server Automation

This section explains how to register BMC BladeLogic Server Automation.
Registration of BMC BladeLogic Server Automation enables use of virtual L-Servers of Solaris zones.
For details on the required BMC BladeLogic Server Automation settings, refer to "H.1 Coordination with BMC BladeLogic Server
Automation" in the "Setup Guide CE".
Use the following procedure to register BMC BladeLogic Server Automation:
1.
From the ROR console menu, select [Settings]-[Register]-[Management Software(BladeLogic)].
The [Register Management Software(BladeLogic)] dialog is displayed.
2.
Set the following items:
Management software name
Enter the name of the target BMC BladeLogic Server Automation.
Enter a character string beginning with an alphabetical character and containing up to 15 alphanumeric characters and hyphens
("-").
Label
Enter the Label of the Management software.
Enter up to 32 alphanumeric characters or symbols.
Comments
Enter the Comment of the Management software.
Enter up to 256 alphanumeric characters or symbols.
3.
Click <OK>.
BMC BladeLogic Server Automation is registered using the entered information.
- 58 -