When Using Server Virtualization Software; Installation; Preparations - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

18.3.4 When Using Server Virtualization Software

Virtual machines of server virtualization software supported by Resource Orchestrator can be managed as virtual L-Servers in the following
cases:
-
When the virtual machine is managed by VM management software
-
When a Solaris zone is used
-
When OVM for SPARC is used.
For the server virtualization software supported by Resource Orchestrator, refer to "2.4.2.1 Required Basic Software" and "2.4.2.4 Required
Software" in the "Design Guide CE".
Server virtualization software supported by this function is as follows:
-
VMware
-
Hyper-V
-
Solaris Zones
-
OVM for SPARC
Note
If "2.4.2.4 Required Software" in the "Design Guide CE" is not installed, a new L-Server cannot be deployed on that VM host.
When using VMware, the virtual machine on a VM host which is not managed with VM management software can be linked to an L-
Server. Power operations (starting up, stopping, and restarting) and modification of basic information (label/comments) can be performed
for the L-Server.
When using Hyper-V, the virtual machine on a VM host which is not managed with VM management software cannot be linked to an L-
Server.

18.4 Installation

This section explains the installation method to link a configured physical server to a physical L-Server, and the installation method to
link a configured virtual machine to a virtual L-Server.

18.4.1 Preparations

Preparations
For details, refer to the procedure in "D.2 Preparations for Servers" in the "Design Guide CE".
Setup
Register the resources of configured physical servers and VM hosts to Resource Orchestrator.
-
When linking configured physical servers with physical L-Servers
When linking a configured physical server to an L-Server, perform the following procedure:
1.
Register Resources
a.
Register Storage Management Software
b.
Register Managed Servers
- 239 -