Network] Tab - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

When specifying search conditions, the relevant disk resource list is displayed.
Select from the displayed disk resources.
The specified disk resources are allocated to the L-Server.
Search conditions
Storage pool
Select the storage pool of the storage destination of the disk resource.
Search size
Enter the lowest value of the disk size to be searched as a number with up to one decimal place, in units of gigabytes.
Allocation status
Specify the status for the disk to allocate to the L-Server.
-
Unallocated
Specify when selecting a disk resource which is not allocated to another L-Server.
-
Allocated
Specify when selecting a disk resource which is allocated to another L-Server.
Allocated L-Server
Specify an L-Server when sharing the disk resources.
Disk name
Specify the name of the disk to be found.
-
Begins with
Specify when searching for disks whose names begin with the specified string.
-
Includes
Specify when searching for disks whose names include the specified string.

16.2.4 [Network] Tab

Specify the following items.
NIC/Network
Configure the network to connect with the NIC used in the L-Server. Clicking <Add> displays the [Add a Network] dialog. Select a
network resource to connect with the NIC.
The number of NICs that can be configured is 1 to 32.
NICs
Select the NIC to use in the L-Server from the selection list. When adding a new NIC or NIC group, select the number displayed
as "(Undefined)" from the list. When selecting an already defined NIC, a network resource is added.
Setup redundant NIC
When performing NIC redundancy, check the [Setup redundant NIC] checkbox, and select another NIC pair from the list to make
redundant.
Network
Select a network resource to connect.
Clicking <Delete> deletes the selected network.
Clicking <Change> displays the [Select a Network Resource] dialog.
If <OK> is clicked while a network resource is selected, the network resource to connect is modified.
- 178 -