Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 246

a.
Create and Register Each Resource
Perform resource creation and registration, referring to
Resources in Resource
b.
Release the resources of the source L-Server for usage change
Resources are released while the resource details of the source L-Server for usage change are preserved.
For details, refer to
c.
Create an L-Server
Create an L-Server for which resources are already allocated (allocated), referring to
Perform the following configuration:
-
Set [Deploy] for image deployment from the select a cloning image section of the [General] tab.
-
Do not check the [None (Definition only)] checkbox from the [General] tab.
-
Check the [Automatic (when powered off)] checkbox of [Resource release] on the [Server] tab.
When using multiple L-Servers, switching between them, on unused physical servers in a server pool
Repeat the following procedure the same number of times as the number of physical servers which are used for usage change.
a.
Create and Register Each Resource
Perform resource creation and registration, referring to
Resources in Resource
b.
Confirm the Server Pool
Confirm whether an unused physical server exists in the server pool.
When an L-Server is allocated to all physical servers in the specified server pool, release a physical server from an L-Server.
c.
Release the resources of the source L-Server for usage change
Resources are released while the resource details of the source L-Server for usage change are preserved.
For details, refer to
d.
Create an L-Server
Create an L-Server for which resources are already allocated (allocated), referring to
Perform the following configuration:
-
Set [Deploy] for image deployment from the select a cloning image section of the [General] tab.
-
Do not check the [None (Definition only)] checkbox from the [General] tab.
-
Check the [Automatic (when powered off)] checkbox of [Resource release] on the [Server] tab.
Operation
The methods for operating physical servers after usage changes are as follow.
Perform the procedure before performing any operations.
-
When using multiple L-Servers, switching between them, on a single physical server
Usage can be changed by repeating the following procedure.
1.
Confirm the Physical Servers to Use
2.
Stop the Source L-Server for Usage Change
Stop L-Servers operating on physical servers which are required for change usage.
For details, refer to
Pools".
"17.8.2.2 Releasing Resources".
Pools".
"17.8.2.2 Releasing Resources".
"17.1.2 Stopping an L-Server".
"Chapter 5 Registering
"Chapter 5 Registering
- 230 -
Resources" and "Chapter 14 Registering
"Chapter 16 Creating L-Servers".
Resources" and "Chapter 14 Registering
"Chapter 16 Creating L-Servers".