Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 190

The default is "Automatic".
-
When [Automatic] is Selected
Select a physical server automatically from the resource pool with high priority.
When selecting [Automatic], operate a resource pool with priorities.
When there are multiple resource pools with the same priority, physical servers will be selected satisfying the conditions for a
resource pool which has been searched in advance. Therefore, the physical server which has the least difference from the L-Server
definitions may not be allocated
For details, refer to "B.9 Methods for Selecting Physical Servers Automatically" in the "Setup Guide CE".
-
When [Pool] is Selected
A list of server pools which can be selected is displayed.
In the server pool list, the server pool name and the number of servers (unused/total) are displayed.
Select the server pool from the server pool list.
-
When [Server] is Selected
The list of the physical servers that can be selected is displayed.
In the physical server list, server names, model names, CPU performance, memory size, and NIC numbers are displayed.
Select the physical server to use from the physical server list.
When creating an L-Server for which only a configuration definition has been created, a physical server not allocated to the L-
Server can be selected from the list.
When the [Currently unusable] checkbox is checked, failed physical servers and physical servers that have inconsistencies in their
admin LAN network configurations are displayed in the list.
When the [Busy] checkbox is checked, the following physical servers are displayed in the list:
-
Physical servers already allocated to other L-Servers
-
Physical servers already assigned as spare servers
-
Physical servers with an OS installed
Note
The [Select a Server Resource] dialog works as follows, depending on the configuration status of admin LAN network resources on
the NICs in the [General] tab or the [Network] tab.
-
When admin LAN network resources are unset on the NIC
Depending on the selected physical server or the server pool, admin LAN network resources are automatically set on the NIC
configurations in the [General] tab or the [Network] tab.
For details on the resources automatically set, refer to the [General] tab or the [Network] tab.
-
When admin LAN network resources have been set on the NIC
Physical servers or server pools matching the admin LAN network NIC configurations that are set on the [General] tab or the
[Network] tab are displayed.
When not filtering resources using admin LAN network settings, open the [Select a Server Resource] dialog after deleting the
settings.
Resource release
Specify whether to release the physical server allocated to the L-Server when the power is turned off.
If the [Automatic (when powered off)] checkbox is checked, the server is released when the power is turned off.
- 174 -