Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 199

[KVM]
The upper limit of the number of CPUs is 64.
[Solaris Zones]
The size of resources of hardware where VM hosts operate can be specified.
CPU Performance
Enter the server CPU speed to allocate to the L-Server. Enter a number with up to one decimal place, in units of gigahertz. A number
between 0.1 and 8 can be specified.
The value entered here is used to determine the CPU ratio to allocate to the L-Server out of the clock speed of the physical CPU of the
VM host. If VM hosts with different types of physical CPUs are registered in the VM pool, the actual processing performance may
differ according to the allocated VM host.
[VMware]
For VM guests on VMware, set the CPU performance for the limit value and 0 for the reserved value.
Information
For details on limit values and reserved values of CPUs, refer to the "vSphere Resource Management Guide" of VMware.
Refer to the relevant version of document, referring to the following URL:
URL: http://www.vmware.com/support/pubs/vs_pubs.html
[Hyper-V]
CPU performance is realized through the resource settings of VM guests and VM hosts.
When the SCVMM management console or a Hyper-V manager is used to change the resource reservation of a VM guest or VM host,
there is a chance that the creation or starting of VM guests may fail, or the expected performance may not be obtained.
Please do not change VM guest and VM host resource reservations when L-Servers have been created.
[KVM]
The CPU Capping function is supported.
[OVM for x86]
Specify the size within the range of 0.3 to
[Solaris Zones]
Specify the size within the range of 0.1 to
Memory Size
Enter the memory capacity to allocate to the L-Server. Enter a number with up to one decimal place, in units of gigabytes. A number
between 0.1 and 255 can be specified.
[VMware]
For VM guests on VMware, set the memory size for the limit and reserved values.
Information
For details on limit values and reserved values of memory, refer to the "vSphere Resource Management Guide" of VMware.
Refer to the relevant version of document, referring to the following URL:
URL: http://www.vmware.com/support/pubs/vs_pubs.html
[Hyper-V]
For VM guests with dynamic memory disabled, set the memory size for the virtual machine memory.
For VM guests with dynamic memory enabled, set the memory size to the maximum memory.
The enabled/disabled state of dynamic memory is determined according to the value specified in the VM specific information definition
the_resource_size_of_the_hardware_on_which_the_VM_hosts_operate .
the_resource_size_of_the_hardware_on_which_the_VM_hosts_operate .
- 183 -