Attaching And Detaching Disks - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

The differences in VM guest configuration are reflected on the configuration of the L-Server by periodic queries made to the VM
management software.
For details on reflection of L-Server configuration by periodic queries, refer to
-
Changing an L-Server name changes the VM guest name on server virtualization software as well.
For associating an L-Server name with a VM guest name, refer to
"16.1 Creation Using an L-Server
-
To change an L-Server name, the L-Server must be stopped.
When the L-Server power status is on, the L-Server name cannot be changed.
-
Change the names of physical L-Servers when the power status of the L-Server is OFF.
When the physical L-Server power status is on, the L-Server name cannot be changed. For virtual L-Servers, only when the VM
product is VMware, can the L-Server name can be changed while the L-Server power status is on. For details, refer to the manuals of
VM products.
1.
Right-click the target L-Server in the orchestration tree, and select [Change Settings]-[Basic Information] from the popup menu.
The [Resource Change Setting] dialog is displayed.
2.
Change the items you want to modify.
3.
Click <OK>.
The basic information of the L-Server is modified.
From the command-line, execute rcxadm lserver modify.
For details on the rcxadm lserver modify command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".

17.2.3 Attaching and Detaching Disks

This section explains how to modify the disk configuration of an L-Server.
[OVM for SPARC]
Attaching and detaching of disks is not possible from the ROR console. Modify them from the control domain.
Prerequisites
-
For physical L-Servers, attachment and detachment of disks is only possible when using SAN boot.
-
[Solaris Zones]
Attaching and detaching of disks is not possible from the ROR console.
However, it is possible from the global zone.
Attaching a Disk
Use the following procedure to attach a disk to an L-Server:
1.
Right-click the target L-Server in the orchestration tree, and select [Change Settings]-[Attach Disk] from the popup menu.
The [Attach a New Disk] dialog is displayed.
2.
Enter the following items:
Size
Enter the disk size of the additional disk as a number with up to one decimal place, in units of gigabytes. "10" is initially displayed.
Resource type
Specify the disk to allocate to the L-Server.
Select from the following items.
Template".
- 201 -
"17.2 Modifying".
"Association of an L-Server Name with a VM Guest Name" in