Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 256

2.
Register Resources in Resource Pools
a.
Register physical server resources in a server pool.
In the [Register Resources] dialog for the server pool, check the [Display servers with OS installed] checkbox and specify
a physical server with an OS installed.
b.
Register the disks that are connected to the physical server to be linked with the L-Server in a storage pool.
c.
Register address set resources.
Specify the scope including MAC/WWN addresses being used by the configured physical server.
d.
Register network resources.
Specify IP addresses not being used by the configured physical server or the virtual machine.
When the IP address used for a configured physical server, a virtual machine, or other devices is included in the subnet
address scope, specify the IP address in the "IP addresses to be excluded".
-
When linking configured virtual machines with virtual L-Servers
When linking a configured virtual machine to an L-Server, perform the following procedure:
1.
Register Resources
a.
Register VM Management Software
b.
Register Managed Servers
2.
Register Resources in Resource Pools
a.
Register VM host resources in a VM pool.
[Solaris Zones] [OVM for SPARC]
The overcommit attribute of the VM pool where the VM host is registered is set to L-Server.
For details on creating a VM pool for overcommit, refer to
b.
Register the virtual storage and disks that are used for a virtual machine to be linked with the L-Server in a storage pool.
[OVM for SPARC]
It is not necessary to register virtual storage and disk resources.
[Solaris Zones]
When a VM host not managed with server management software is used, it is not necessary to register virtual storage
and disk resources.
c.
Register network resources.
Specify IP addresses not being used by the configured physical server or the virtual machine.
When the IP address used for a configured physical server, a virtual machine, or other devices is included in the subnet
address scope, specify the IP address in the "IP addresses to be excluded".
Note
When the virtual storage and disk resources that are used for a virtual machine to be linked with the L-Server are not registered in a
storage pool, the amount of resources cannot be managed in the storage pool. However, the amount of resources can be linked with
virtual L-Servers. Disks created on the virtual storage can be operated by the virtual L-Server.
Confirmation
Perform the procedure described in
server or virtual machine linked to an L-Server, using the following procedure:
"18.4.2 For Physical Servers" or
"Chapter 20 Resource Pool
"18.4.3 For Virtual Machines", and confirm the configured physical
- 240 -
Operations".