Quick Install For Usb - Ricoh Aficio GX e3300N User Manual

Hide thumbs Also See for Aficio GX e3300N:

Table of Contents

2. Preparing for Printing

Remove the seal on the USB slot located on the rear of the printer, and then insert the USB

cable's hexagonal (type B) plug firmly into the slot.

Insert the USB cable's rectangular (type A) plug firmly into the computer's USB slot.

• Insert the USB cable's plug with the USB mark facing down.

• Make sure that the USB cable is fully inserted.

• Make sure the USB cable is connected properly, especially when the bypass tray is attached to the

printer, because the tray makes connecting the cable difficult.

Quick Install for USB

Follow the procedure below to install the printer driver and User Guide.

• Do not turn the printer on until you have read how to do so.

• Only administrators can perform this installation. Log on as a member of the Administrators group.

Table of Contents