Usb Connection Is Not Automatically Detected - Ricoh Aficio GX e3300N User Manual

7. Troubleshooting
The printer driver installer does not start.
An error occurs during installation.
The printer driver installer does not start.
An error occurs during installation.
The printer driver installer does not start.
An error occurs during installation.
7

USB Connection is not Automatically Detected

If the USB connection is not automatically detected, do the following:
1. Delete the printer driver.
2. Delete the device.
3. Run [Quick Install for USB] again.
If these steps do not solve the problem, contact your sales or service representative.
• For details about deleting the printer driver, see p.210 "Uninstalling the Printer Driver".
• For details about deleting the device, see p.211 "Deleting Devices".
• For details about [Quick Install for USB], see p.57 "Quick Install for USB".
208
• If the screen does not appear even when you
double-click the SETUP.EXE icon, or if an error
occurs during installation, access the CD-
ROM drive from [My Computer] or
[Explorer]. Double-click the RDISETUP.EXE
icon, and then install the printer driver by
following the instructions that appear on the
screen.
• An error occurs if the path to the location of
the stored data is too long. To install a printer
driver downloaded from a Website or copied
from a CD-ROM, save the printer driver
directly on the hard disk, and then install it.
• On the [Start] menu, point to [Settings], and
then click [Printers and faxes]. In the [Printers
and faxes] window, install the printer driver.
For details, see Windows Help.