Control Panel - Ricoh Aficio GX e3300N User Manual

1. Read This First
1. USB slot
Connect the USB cable from the computer here.
2. Ethernet port
1
Use a network interface cable to connect the printer to a network.
3. Duplex Unit
Turns the paper over when performing duplex printing.
4. Vent
Air is vented here to prevent the inside of the printer from getting too warm. Do not lean anything against the vent
or block it in any way. If the inside of the printer gets too warm, a breakdown could occur.
5. Power inlet
Plug the power cord.
Plug one end of the power cord into the printer's power inlet and the other end into a wall outlet.
Connect the grounding wire attached to the power plug directly to a grounding terminal.
6. Guide board
To remove paper that has jammed inside the printer, open the guide board by removing the duplex unit.

Control Panel

The illustrations in this manual show the
the illustrated model.
1
2
3
4
5
6
7
1. Display
Displays current printer status and error messages.
2. Cartridge replacement indicator
Each color corresponds to a print cartridge. From the left, the colors show the status of the black (K), cyan (C),
magenta (M), and yellow (Y) cartridges.
3. [Menu] key
Press this key to make and check the current printer settings.
22
model. The
8
9
10
11
12
BUG106S
model may differ slightly from