Status Monitor Errors; Status Monitor Does Not Open; No Response From Printer; No Paper/Tray Not Detected (Tray 1) - Ricoh Aficio GX e3300N User Manual

Status Monitor Errors

If an error occurs with the printer, Status Monitor displays an error message. Click [User Guide...] to display
the page corresponding to the error where you can check how to solve the problem in more detail.
Depending on the "Auto Continue" and "Env.Slctr.Alert" settings specified on the System menu, some of the
following messages might not appear.
• See p.182 "Specifying System Settings using the Control Panel (System Menu)"

Status Monitor Does Not Open

If the Status monitor does not open for a shared printer, the following questions should be addressed.
Are the share settings correct?
Check the share settings of the printer. The printer driver must also be installed on the client computer. See
p.68 "Setting Up a Server" and p.69 "Setting Up a Client Computer".

No Response from Printer

Follow the procedure below to check the port settings and the connection between the printer and computer.
1. Check that the power of the printer is on.
2. Make sure that the computer and printer are properly connected using a USB cable.
3. Open the printer properties dialog box.
4. Click the [Ports] tab.
5. Check that USB is selected in the [Print to the following port:] list.
• If you want to connect the printer to the network, check the operating environment, and then change
the port setting. For details about configuring the port, see p.75 "Using the SmartDeviceMonitor for
Client Port", p.76 "Using the Standard TCP/IP Port", and p.78 "Using the LPR Port".

No Paper/Tray Not Detected (Tray 1)

Tray 1 is empty or the paper in it is not loaded properly. Do one of the following:
• Load the tray.
• Print by Form Feed (Change the tray).
• Cancel the print job.
Status Monitor Errors
7
255