Ricoh Aficio GX e3300N User Manual page 213

User guide
Hide thumbs Also See for Aficio GX e3300N:
Table of Contents

Advertisement

An error occurs during software installation.
Quick Install for Network
The CD-ROM may not be inserted properly.
The power cord or Ethernet cable may not be
properly connected.
The operating system is incompatible.
There is insufficient hard disk space.
Other applications are not closed.
The printer's IP address has not been specified.
The computer and printer are not on the same
network segment.
If an error occurs because the printer is detected as
an unidentified device, follow the instructions under
"The USB connection does not work". If this does
not solve the problem, do the following: First reboot
Windows. Then, on the [Start] menu, select
[Settings], and then select [Control Panel]. Double-
click the System icon, and then on the [Hardware]
tab, click [Device Manager]. Under [Other
Devices], select the printer, and then open its
properties dialog box. On the [General] tab, click
[Reinstall Driver] to reinstall the software.
Check that the CD-ROM is inserted properly.
Check also that it is not damaged and the CD-ROM
drive is working properly.
Check that the power cord and Ethernet cable are
properly connected and not damaged.
Check that the computer's operating system is fully
compatible with this printer. See p.37 "Checking
the Computer and Installation Area".
When installing software, quit all other
applications. Installation may be disrupted if other
applications are open. Also, quit any anti-virus
applications that are running.
If the printer cannot be found and only "Printer Port"
appears in the printer selection dialog box, either
the printer's IP address has not been specified or
the computer and printer are not on the same
network segment. Before installing the software,
check the printer's IP address and the network
topology. Otherwise, select "Printer Port" in the
dialog box, and then install the printer driver. If you
do this, SmartDeviceMonitor for Client will not be
simultaneously installed, so install it afterwards,
and then configure the port.
Software Cannot Be Installed
7
211

Advertisement

Table of Contents
loading

Table of Contents