7. Troubleshooting
Out of Printable Temperature Range
Follow the procedure below to relocate the printer when the temperature inside the printer is inappropriate,
extremely high or low, for printing.
1.
Turn the printer off.
2.
Place the printer in a 10 to 32°C (50 to 89.6°F) environment.
3.
Turn the printer on.
7
• If humidity is more than 54%, the high end of the appropriate temperature range will be lower than
usual.
• Even after the power is turned on, the printer may remain in the standby mode until it acclimates to
the room temperature. If this happens, wait until the [Power] key stops blinking and stays lit.
• For details about what conditions the printer can be used under (ambient temperature and humidity
range), see p.35 "Checking the Computer and Installation Area".
• See p.201 "Moving".
Printer Error
An error has occurred in the printer. Turn the power off once, and then turn it back on.
• If the printer is relocated from a cold area to a warm area or the printer is placed in a room where
the temperature varies greatly, condensation may form inside the printer causing errors. If this
happens, perform the decondensation procedure.
• For details about de-condensation, see p.176 "De-condensation".
278
BUG118S