Quick Install For Usb - Ricoh SP 210 Setup Manual

Quick Install for USB

• Do not turn the machine on until prompted to do so in the installer window. If you connect the machine to the
computer when it is on, you will be unable to install the driver correctly.
• Do not connect the USB cable to the machine until prompted to do so in the installer window. If you connect
the machine to the computer before the prompt appears, the machine will be identified prematurely by the
computer and you will be unable to install the driver correctly.
Make sure the machine is off.
Turn on the power of the computer.
Insert the CD-ROM into the CD-ROM drive.
Select a language and product for the interface, and then click [OK].
Click [USB Quick Install].
If WPS cannot be used with SP 212w/SP 212Nw/SP 213w/SP 213Nw, click [Smart Organizing Monitor].
DCT070
CXP122
CXP066
DCT045
10