Ricoh Aficio GX e3300N User Manual page 472

5. Using the Printer with a Macintosh
To display the [Setup] settings, using the pop-up menu in the middle-right of the dialog box, switch
from [the name of the application in use] to [Printer Features], and then select [Setup] from the [Feature
Sets:] pop-up menu.
After selecting the paper type as required, switch the envelope selector to "
If you select [Inkjet Plain Paper], the machine will print on one side only. To print on both sides, select
[Plain].
5. Make print settings, and then click [Print].
Depending on the selected paper type, a confirmation screen might appear. If it does, read the
message, and then click [OK].
• Under Mac OS X 10.3.x - 10.4.x, the [Copies & Pages] setting appears under the name of the
application in use.
• The vertical and horizontal resolutions will be the same.
5
• For details about opening the [Setup] or [Paper Feed] settings, see p.138 "Displaying the Print dialog
on a Macintosh".
• For details about the number of sheets that can be loaded in the paper tray, see p.44 "Loading
Paper".
• For details about how to handle paper, carry out duplex printing, and use options, see p.44 "Loading
Paper".
• For details about dithering, see the printer driver Help.
• For details about specifying a time for ink drying, see the printer driver Help.
• For details about the printable areas of envelopes, see p.44 "Loading Paper".
Printing with Tray 2/Tray 3 with a Macintosh
This section explains how to load paper in tray 2/tray 3 and print on it.
• Paper lighter than 157 g/m
click [Plain] in the [Paper type:] pop-up menu.
1. Open the [Setup] settings.
2. Select the paper type from the [Setup] settings.
3. Make sure [Tray 2]/[Tray 3] is selected from the [Paper Feed] settings.
4. Slide the paper guide into position according to the paper size.
142
2
(297.6 lb.) can be loaded into tray 1. To use Paper lighter than that,
".