Installing The Pcl Or Rpcs Raster Printer Driver (Usb) - Ricoh Aficio GX e3300N User Manual

2. Preparing for Printing
Installing the PCL or RPCS Raster Printer Driver
(USB)
This section explains how to install only the printer driver when the printer is connected to a computer via
USB.
2
If you installed the printer driver by performing Quick Install for USB, there is no need to install it again
here.
• Only administrators can perform this installation. Log on as a member of the Administrators group.
• Do not turn on the power at this point.
The following explanation uses Windows XP as an example. Procedures under other operating systems
may differ.
Screens vary according to the operating environment.
1. Start Windows, and insert the provided CD-ROM into the CD-ROM drive.
Quit all other applications currently running.
When you start Windows, the Add New Hardware Wizard may appear. If this happens, click
[Cancel]. Check again that the power is off, and then proceed to step 2.
After inserting the CD-ROM, the [Printer Drivers, Manuals, Utilities] dialog box appears. If it does not,
double-click the CD-ROM drive icon under [My Computer] or [Explorer], and then double-click
[SETUP.EXE].
If the [Printer Drivers, Manuals, Utilities] screen does not appear even when you double-click the
SETUP.EXE icon, or if an error occurs during installation, access the CD-ROM drive from [My
Computer] or [Explorer], double-click the RDISETUP.EXE icon in the [DRIVERS] folder, and then install
the printer driver by following the instructions that appear on the screen.
2. Select a language for the interface, and then click [OK].
3. Click [PCL/RPCS Raster Printer Drivers].
68
BUG111S