Ricoh Aficio GX e3300N User Manual page 256

7. Troubleshooting
See p.232 "Removing Paper Jammed around the Guide Board" and p.238 "If You Cannot Remove Jammed
Paper".
Reset Bypass Tray correctly
The bypass tray has not been installed correctly. Reset the bypass tray correctly. p.32 "Detaching and
Reattaching the Multi Bypass Tray".
Reset Cartridge
No print cartridge has been installed. Install the print cartridge correctly.
See p.266 "Cover Open / Print Cartridge(s) Not Detected".
Reset Duplex Unit correctly
The duplex unit has not been installed correctly. Reset the duplex unit correctly.
See p.268 "Duplex Unit Not Detected".
Resetting Job...
The printer is reinitializing a print job.
Wait a moment.
Right Front Cover is open / Close Right Front Cover
7
The right front cover is open. Close the print cartridge cover.
See p.266 "Cover Open / Print Cartridge(s) Not Detected".
Setting change...
The printer is changing its settings. Wait a moment.
Temp. alert Please wait...
The printer is too hot or cold at start-up. Wait until "Ready" appears on the control panel.
Waiting...
Wait a moment.
• If this does not eliminate the problem, contact your service representative.
254