Ricoh Aficio GX e3300N User Manual page 684

10 In the [Utilities] folder, double-click the Terminal icon.
The [Terminal] appears.
11 On the [Terminal] screen, enter the following command:
cd ~/Desktop/Name of the created folder/
Enter the following command and check the name of the queue that you want to update:
lpstat -p
"printer XXXXXX is idle." will be displayed.
Note
"XXXXXX" is the name of the queue.
12 Enter the following command:
./update.sh XXXXXX
Updating will begin.
You can view the progress of the update on the printer's control panel.
Updating...
>_________________
Extracting data
>>>_______________
Accessing NVRAM
>>>>>>>>>>>>>>____
If the update is successful, "Update complete Power Off->On" will appear on the printer's
control panel.
If the update fails, "Update Error Retry update" will appear on the printer's control panel. If
this error message is displayed, perform the update procedure again from the beginning.
13 Check that "After your printer finishes updating the firmware, please reboot your printer." is
displayed on the [Terminal] screen, and then enter the following command:
exit
"logout" will be displayed.
Waiting for Data
>>________________
Overwriting
>>>_______________
Update complete
Power Off->On
5
Receiving Data
>>>_______________
Verifying
>>>>>>>>>>>>______