• Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might
occur.
• Do not handle the machine while the cartridge is being filled. Ink filling begins when the machine's
power is switched on. Until the "Loading Ink..." message disappears from the control panel.
1.
Remove the orange tape from around the power cord.
2.
Plug the power cord fully into the printer.
3.
Plug the power cord fully into the wall outlet.
The surface should be level within two degrees.
Make sure the power cord is not trapped under the printer.
BUG116S
BUG117S
Setting Up the Hardware
43
2