Ricoh Aficio GX e3300N User Manual page 78

2. Preparing for Printing
6. Double-click the printer name or click [+] to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer
model, and port.
7. Click [Port:], and then click [Add].
8. Click [SmartDeviceMonitor], and then click [OK].
2
9. Click [TCP/IP], and then click [Search].
A list of printers using TCP/IP appears.
10. Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use a printer not listed here,
click [Specify address], and then enter the IP address or host name of the printer.
11. Check that the port of the selected printer is displayed in [Port:].
12. Select the [Default Printer] check box to configure the printer as default.
13. Click [Continue].
Installation starts.
14. Select whether or not to open the Status monitor automatically.
15. Click [Next >].
16. Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer to complete installation.
• If the message "Digital Signature Not Found" or the [Software Installation], [Hardware Installation]
or [Windows can't verify the publisher of this driver software] dialog box appears:
• Click [Yes], [Continue Anyway] or [Install this driver software anyway] to continue the installation.
• To change the machine's settings while the machine is in use, uninstall the SmartDeviceMonitor for
Client Port being used, change the machine's network settings on the control panel or using a Web
browser, and then install the printer driver.
• A message appears if there is a newer version of the printer driver already installed. If there is, you
cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add
Printer]. See p.249 "If a Message Appears during Installation".
Using the Standard TCP/IP Port
This section explains how to install the printer driver (TCP/IP) and set up the Standard TCP/IP Port.
76