5. Using the Printer with a Macintosh
Software on the CD-ROM for Macintosh
This section describes the CD-ROM supplied with the printer.
Files for Macintosh
The following is a list of the files on the CD-ROM.
File Name
product name_Mac_OS_X
RPCS Raster Printer Driver for Macintosh
• PowerPC-Based Macintosh: Mac OS X 10.3 or later
5
• Intel-Based Macintosh: Mac OS X 10.4.5 or later
Manuals (HTML files)
*
Not provided with the GX e2600.
RPCS Raster Printer Drivers for Macintosh
This section gives the file locations of the different RPCS raster printer drivers and their system requirements.
File Location (GX e3300N/GX e3350N only)
The drivers are in the following folders on the supplied CD-ROM.
• RPCS raster printer driver for Mac OS X 10.3 or later
Mac OS X 10.3 or later\RPCS_R
• RPCS raster printer driver for Mac OS X 10.5 or later
Mac OS X 10.5 or later\RPCS_R
System Requirements for the Printer Drivers
• Computer
PowerPC-Based Macintosh/Intel-Based Macintosh
• Operating Systems
PowerPC-Based Macintosh: Mac OS X 10.3 or later
Intel-Based Macintosh: Mac OS X 10.4.5 or later
• Display Resolution
Minimum SVGA 800 × 600 pixels
158
*
*