Ricoh Aficio GX e3300N User Manual page 409
User guide
Hide thumbs
Also See for Aficio GX e3300N:
- Specifications (4 pages) ,
- Installation manual (12 pages) ,
- Installation manual (13 pages)
Table of Contents
Advertisement
• Only administrators can perform this installation. Log on as a member of the Administrators group.
1.
Start Windows, and then insert the provided CD-ROM into the CD-ROM drive.
Quit all applications currently running.
2.
Select an interface language, and then click [OK].
3.
Click [PCL/RPCS Raster Printer Drivers].
The software license agreement appears in the [<License Agreement>] dialog box.
4.
Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
5.
Click [Connected via LAN].
6.
Double-click the printer name or click [+] to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer
model, and port.
7.
Click [Port:], and then click [Add].
8.
Click [Standard TCP/IP], and then click [OK].
Configure the Standard TCP/IP port settings, and then see Windows Help if [Standard TCP/IP Port]
does not appear.
9.
Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
10.
Enter the printer name or IP address in the [Printer Name or IP Address] box.
The [Port Name] text box automatically obtains a port name. Change this name if necessary.
When screen for Device selection appears, select "RICOH Network Printer C model".
11.
Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
The installation start dialog box reappears.
12.
Check that the port of the selected printer is displayed in [Port:].
13.
Configure the default printer as necessary.
14.
Click [Continue].
The printer driver installation starts.
15.
Select whether or not to open the Status monitor automatically.
16.
Click [Next >].
17.
Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer to complete installation.
• If the message "Digital Signature Not Found" or the [Software Installation], [Hardware Installation]
or [Windows can't verify the publisher of this driver software] dialog box appears:
Installing the Drivers for Network Connection
2
79
Advertisement
Chapters
Table of Contents
Troubleshooting
