Canon MF7280 - ImageCLASS B/W Laser Network Manual page 50

IMPORTANT
•
A maximum of 5 MAC addresses can be specified.
•
If you select [On] for <Apply Settings>, you will become unable to access from
MAC addresses which have not been specified. Check the MAC addresses
carefully before specifying them. If the corresponding MAC address does not exist,
you will become unable to access the network.
● If you want to disable a MAC address filter:
❑
Press [▼] or [▲] until [Receiving MAC Address Settings] appears ➞ press
[Receiving MAC Address Settings].
❑
Press [Off] for <Apply Settings>.
❑
Press [OK].
The display returns to the TCP/IP Settings screen.
22
Press [Done] repeatedly until the Additional Functions screen
closes.
23
Restart the machine.
❑
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
The TCP/IP settings are complete.
3-17
Protocol Settings
3