Network Environment Setup Procedures - Canon MF7280 - ImageCLASS B/W Laser Network Manual

Network Environment Setup Procedures

Before using the machine in a network environment, it is necessary to perform the
following setup procedures.
2
1
2
3
IMPORTANT
If you are configuring the interface settings for the first time, use the control panel of this
machine. After configuring the TCP/IP settings, you can change the content by using the
Remote UI.
2-2

Network Environment Setup Procedures

Network Cable Connection (See "Connecting the Machine," on p. 2-3.)
Connect the machine to the network using the network cables.
Interface Settings (See "Interface Settings," on p. 2-7.)
Specify the interface settings for communication between the machine and computers on your network. To
specify the settings, use:
•
The machine's control panel
•
The Remote UI (via a web browser)
Communication Environment Setup (See "Communication Environment Setup," on p. 2-12.)
Set up a configuration for communication between the machine and computers on your network.