6
3
3-42
Setting Up a Computer as a File Server
Set a recipient address using the control panel.
Sample recipient setting:
•
Server side settings:
[Full Computer Name]: starfish.organization.company.com
Create a directory named "share" in the specified FTP server's home
directory "\Inetpub\ftproot", and then set "share" as the data destination.
•
The machine's recipient settings:
The Protocol drop-down list:
[Host Name]:
[File Path]:
[User]:
[Password]:
IMPORTANT
•
To use [Full computer name], which was confirmed in step 4, as the host name for
[Host Name] as shown in the above example, it is necessary to use a DNS server.
(This applies even if the machine and the FTP server are in the same subnet.) If no
DNS server is available, the host name setting should be specified using the IP
address of the FTP server.
•
A maximum of 120 alphanumeric characters can be entered for both [Host Name]
and [File Path] on the control panel.
•
If you switch the language of the touch panel display, [Host Name] and [File Path]
may not be displayed correctly.
FTP
starfish.organization.company.com
share
User name entered in step 5
Password for the above user