Windows 2000/Xp/Server 2003 - Canon MF7280 - ImageCLASS B/W Laser Network Manual

■ Changing the Port after Installing the Driver
1
3
The installation of the driver and the port settings is complete.

Windows 2000/XP/Server 2003

■ Installing a New Driver
1
3-26
Setting Up a Computer for Printing/Sending a Fax
Install Canon LPR2, and change the port settings.
For instructions on how to install Canon LPR2 and set ports, see the Canon LPR2
User's Guide (PDF manual) on the UFR II Printer Kit/Super G3 FAX Board
CD-ROM.
IMPORTANT
If you want to use LPD, enter one of the following in [LPR Queue Name] in the [Add
Port] dialog box of Canon LPR2.
- LP
The machine prints according to its spool settings. Normally enter <LP> as a print
queue.
- SPOOL
The machine prints only after spooling a print job on the hard disk, regardless of
its spool settings.
- DIRECT
The machine prints without spooling a print job on the hard disk, regardless of its
spool settings.
Install the driver.
Install the driver according to the procedures indicated in the Starter Guide.
NOTE
•
The print application will be LPD and the print queue will be set to <LP> if the driver
has been installed according to the above procedures.
•
This machine enables you to specify print queues other than <LP>. You can also
use Raw as the print application. For instructions on how to change the settings,
see "Changing the Port after Installing the Driver," on p. 3-27.