Canon MF7280 - ImageCLASS B/W Laser Network Manual page 45

17
3
18
3-12
Protocol Settings
Specify the HTTP settings.
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [Use HTTP] appears ➞
press [Use HTTP].
❑
If you want to use the Remote UI, press [On]. Otherwise, press [Off].
Pressing [Off] for [Use HTTP] automatically sets [Remote UI] to 'Off'.
❑
Press [OK].
The display returns to the TCP/IP Settings screen.
NOTE
[Remote UI] can be set on the System Settings screen.
Specify the port number settings.
● If you want to change the standard port number settings:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [Port Number Settings]
appears ➞ press [Port Number Settings].