Canon MF7280 - ImageCLASS B/W Laser Network Manual page 43

14
3
15
3-10
Protocol Settings
Specify the Raw settings.
● If you want to use Raw as the print application:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [RAW Settings] appears
➞ press [RAW Settings].
❑
Press [On] for <Use RAW>.
❑
If you want to establish bidirectional communication using Port 9100, press
[On] for <Use Bidirectional>.
❑
Press [OK].
The display returns to the TCP/IP Settings screen.
● If you do not want to use Raw as the print application:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [RAW Settings] appears
➞ press [RAW Settings].
❑
Press [Off] for <Use RAW>.
❑
Press [OK].
The display returns to the TCP/IP Settings screen.
Specify the PASV mode for FTP.
IMPORTANT
Whether you use the PASV mode for FTP depends on the network environment
you are using and the settings of the file server you are sending to. Before
specifying the PASV mode for FTP, consult your network administrator.
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [Use PASV Mode for FTP]
appears ➞ press [Use PASV Mode for FTP].