Canon MF7280 - ImageCLASS B/W Laser Network Manual page 27

4
Press [▼] or [▲] until [Ethernet Driver Settings] appears ➞
press [Ethernet Driver Settings].
5
Select [On] or [Off] for <Auto Detect>.
● If you want the machine to automatically determine the
communication mode (Half duplex/Full duplex) and Ethernet type
(10Base-T/100Base-TX):
❑
Press [On].
❑
Skip to step 8.
● If you want to manually specify the communication mode (Half
duplex/Full duplex) and Ethernet type (10Base-T/100Base TX):
❑
Press [Off].
❑
Proceed to step 6.
2-9
Interface Settings
2