Canon MF7280 - ImageCLASS B/W Laser Network Manual page 147

Super Fine
Super G3
Switching hub
T
TCP/IP
7
Telephone Line Type
TIFF
Token Ring
Tone
7-24
Glossary
A resolution mode for sending originals at four times the detail of the Standard
resolution mode. If the receiving machine does not support this mode, the document
is automatically sent in the Fine mode.
Super G3 is a phrase used to describe the generation of fax machines that use ITU-T
V.34 standard 33.6 Kbps modems. Super G3 high-speed fax machines allow a
transmission time of approximately three seconds per page, which results in reduced
telephone line charges.
A network connection box to which a number of computers can be connected.
Conventional hubs send each data packet to every connected computer on the
network, whereas a switching hub forwards data packets from the network to the
appropriate computer, according to the packet's address. Since a switching hub
forwards packets only to their intended recipients, it provides greater efficiency.
Transmission Control Protocol/Internet Protocol. The protocol used to connect to the
Internet and wide area networks.
Depending on the type of telephone line that you have, set the machine to touch tone
(T) or pulse (P) dialing.
Tagged Image File Format. A file format that saves images as high-density bitmaps,
and is suitable for large amounts of image data. The information field (tag) at the start
of each image data record indicates the type of data represented.
A local area network system developed by IBM, in which conflict during message
transmission is avoided by granting "tokens" that allow computers to send messages.
The system can transmit data at 4 or 16 Mbps.
Some data services may require that you use tone dialing. If you have a pulse dial
telephone, press [Tone] to switch temporarily from pulse to tone dialing when
connecting to these data services.