Canon MF7280 - ImageCLASS B/W Laser Network Manual page 48

❑
If you want to store only one IP address, press [Single Address] ➞ enter the IP
address that is to be permitted or rejected using
press [OK].
❑
If you want to store a range of IP addresses that are to be permitted or
rejected, press [Multiple Addresses] ➞ press [First Address] ➞ enter the first IP
address in the range using
enter the last IP address in the range ➞ press [OK].
● If you want to disable an IP address filter:
❑
Leave the settings at the default.
IMPORTANT
•
You can register a maximum of four IP addresses or IP address ranges.
•
An IP address of <0.0.0.0> cannot be specified.
•
The value of [First Address] for [Multiple Addresses] should be smaller than or
equal to that of [Last Address].
•
If the usage of a protocol or print application is not permitted on your device, it
cannot be used even after its IP address is permitted on the machine; on your
device, configure the settings to permit the protocol or print application.
-
(numeric keys) ➞ press [Last Address] ➞
-
Protocol Settings
(numeric keys) ➞
3-15
3