Canon MF7280 - ImageCLASS B/W Laser Network Manual page 39

6
3
3-6
Protocol Settings
Specify the relevant items for your system.
● Using a fixed IP address:
❑
Press [IP Address].
❑
Enter the IP address using
❑
Specify the [Subnet Mask] and [Gateway Address] settings in the same way.
● Using DHCP:
❑
Press [DHCP].
❑
Enter the IP address, subnet mask, and gateway address.
If this information cannot be obtained via DHCP after you restart the machine,
the settings entered in this step are used.
● Using RARP:
❑
Press [RARP].
❑
Enter the IP address, subnet mask, and gateway address.
If this information cannot be obtained via RARP after you restart the machine,
the settings entered in this step are used.
● Using BOOTP:
❑
Press [BOOTP].
❑
Enter the IP address, subnet mask, and gateway address.
If this information cannot be obtained via BOOTP after you restart the
machine, the settings entered in this step are used.
- (numeric keys).