Canon NP6317 Service Manual page 88

CHAPTER 4 IMAGE INFOMATION SYSTEM
3) Attach all parts that have been detached
except the blade.
Make sure that the gear is assembled with
the longer tooth in the groove.
4) Force the blade mount against the devel-
oping assembly in the direction of the ar-
row, and tighten the two screws.
5) Loosen the four screws that hold the blade
on the blade mount, and tighten them
back.
Note:
Do not loosen the screws excessively, or
the blade may come off the positioning
pin found at the center.
4-30
COPYRIGHT © 1999 CANON INC.
[a]
Figure 4-819
Magnetic side seal
Magnetic cylinder
Figure 4-820
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[b]