External Covers - Canon NP6317 Service Manual

CHAPTER 7 EXTERNAL/AUXILIARY MECHANISMS
A.

External Covers

Detach the covers as necessary when
cleaning, checking, or repairing the inside of
the machine. Covers that can be detached by
mere removal of the fixing screws are omitted
from the discussions.
1. Detaching the Inside Cover
1) Remove the two screws that hold the front
cover in place.
2) Remove the screw, and detach the fixing
assembly knob.
3) Remove the knob by pulling out it.
4) Remove the four mounting screws, and
detach the inside cover.
7-4
COPYRIGHT © 1999 CANON INC.
[1] [2]
[7]
[1] Copy tray
[3] Copyboard cover [4] Control panel
[5] Cassette
[7] Left door
Figure 7-201
Note:
On the back side of the PCB cover, there
is an inscription that reads "VR300," in-
tended to indicates the presence of
VR300 on the DC controller PCB. How-
ever, the VR300 does not exist on the
DC controller PCB.
[1]
[1] Right cover
[3] Right door
Figure 7-202
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3] [4]
[6] [5]
[2] PCB cover
[6] Front door
[2]
[3]
[2] Rear cover