Canon NP6317 Service Manual page 120

CHAPTER 6 FIXING SYSTEM
8) Remove the E-ring, and detach gear A.
9) Remove the C-ring, and detach two gears
B.
10) Remove the two screws, and detach the
bushing.
Note:
The bushing is pushed up from below. If
it is difficult to detach, try pushing the
upper fixing roller to the bottom to fa-
cilitate detachment.
11) Push the pressure spring of the lower fix-
ing roller using a screwdriver, and detach
the upper fixing roller.
12) Detach the lower fixing roller.
6-8
COPYRIGHT © 1999 CANON INC.
[1] E-ring
[3] C-ring
Figure 6-211
[1]
[1] Screw
Figure 6-212
[1]
[1] Screwdriver
Figure 6-213
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[4]
[3]
[1]
[2]
[2] Gear A
[4] Gear B
[1]
[2]
[2] Bushing
[2]
[2] Lower roller