E.
PCBs
1.
DC Controller PCB
1) Remove the rear cover.
2) Disconnect all connectors on the DC con-
troller PCB.
3) Remove the two screws; then, remove the
DC controller PCB together with its
mount.
2.
Power Supply Unit
1) Remove the rear cover.
2) Disconnect all connectors on the power
supply unit.
3) Remove the two screws; then, remove the
power supply unit.
COPYRIGHT © 1999 CANON INC.
CHAPTER 7 EXTERNAL/AUXILIARY MECHANISMS
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1] Connectors
[3] DC controller PCB
Figure 7-214
[1]
[1] Connectors
[3] Power supply unit
Figure 7-215
[2]
[1]
[1]
[3]
[2] Screw
[2]
[3]
[1]
[2] Screws
7-11