Unpacking And Installing The Copier; Unpacking - Canon NP6317 Service Manual

CHAPTER 8 INSTALLATION
II. UNPACKING AND INSTALLING THE COPIER
When a piece of metal is moved from a cold place to a warm place, droplets of water form on
its surface. This phenomenon is known as "condensation" and affects the performance of machines.
The simplest way to eliminate condensation in the copier, any machines for that matter, is to leave
it alone until it warms to room temperature (at least one hour).
A.

Unpacking

Step
1 Open the shipping carton.
2 Place your hands beneath the front and rear
of the base plate of the copier (on skids);
then raise the copier and place it on a pedes-
tal or a desk.
3 Open the cardboard box, and take out the
parts and accessories.
4 Remove all tape, and open the cassette.
Remove the cushion blocks from inside the
cassette.
5 Remove the tapes that secure the optical unit
in place (outside the left cover), and slide the
fixing to the right and pull it out.
6 Remove the tapes that secure the No. 4/5
mirror mount in place (outside of the right
cover), and slide the fixing to the right and
pull it out.
8-2
Work
COPYRIGHT © 1999 CANON INC.
Remarks
Check that the following are available:
• Copy tray
• OPERATOR'S MANUAL
• Drum unit
• Power cable
Tape Fixing for optical unit
Tapes
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Fixing