Feeder System; Pick-Up Assembly - Canon NP6317 Service Manual

III. FEEDER SYSTEM
A.

Pick-up Assembly

1. Detaching the U Guide Plate
1) Detach the inside cover, right cover, and
rear cover; then, detach the right door.
2) Disconnect the connector.
3) Remove the pick-up roller assembly.
4) Remove the E-ring and slide the bush.
COPYRIGHT © 1999 CANON INC. CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
[1] Connector
Figure 5-301
[2]
[1]
[1] E-ring
Figure 5-302
[1]
[2] Bush
5-11