Canon NP6317 Service Manual page 87

d. Cleaning the Side Magnetic Seal
and the Blade
1) Clean the surface on which the side mag-
netic seal will be hooked using alcohol.
2) Fix the side magnetic seal at the position
shown in Figure 4-819.
Note:
Put the hook of the magnetic side seal on
its side on plastic marking so that the
magnetic side seal is firmly in the correct
position.
COPYRIGHT © 1999 CANON INC. CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE INFOMATION SYSTEM
Attach the seal so that the long hole
at its end is matched with the round hole
of the developing assembly housing.
Side seal
Butted.
Figure 4-817
Magnetic side seal
Magnetic cylinder
Figure 4-818
4-29