Canon NP6317 Service Manual page 54

CHAPTER 3 EXPOSURE SYSTEM
2. Detaching the Thermal Fuse
1) Detach the control panel and the
copyboard glass.
2) Hold the rear of the No. 1 mirror mount,
and move it to the right until it is posi-
tioned as shown in Figure 3-512.
Note:
When moving the No. 1 mirror mount,
be sure to hold its right side.
3) Remove the two screws, and detach the
thermal fuse.
3-18
COPYRIGHT © 1999 CANON INC.
[1]
[1] Screws
[3] No. 1 mirror mount
Figure 3-512
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[1]
[2]
[2] Thermal fuse