CHAPTER 3 EXPOSURE SYSTEM
2.
Detaching the Lens Cable
1) Detach the copyboard cover, copyboard
glass, lens cover, rear cover, and upper
rear cover.
2) Remove the three screws shown in Figure
3-502, and detach the upper frame.
3) Mark the position of the pulley mount and
the cable mount using a scriber.
4) Remove the two screws that hold the pul-
ley mount in place.
5) Detach the cable.
3-12
COPYRIGHT © 1999 CANON INC.
[1] Screws
Figure 3-502
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]