Mounting The Drum - Canon NP6317 Service Manual

CHAPTER 8 INSTALLATION
Step
10 Open the delivery cover, and remove the two
fixing roller release rolls; then, close the
delivery cover.
B.

Mounting the Drum

The photosensitive drum is susceptable to light; if exposed to room light, it can cause white
spots or black lines on the copy images. As such, be quick in performing the following work.
Step
1 Take out the drum unit from the box, and
remove the light-blocking sheet.
2 Set the drum unit in the copier, and fix it in
place using the knob that held the dummy
drum.
3 Move the grip to clean the corona wire of the
drum unit two to three times.
4 Set the developing assembly in the copier,
and engage it.
8-4
Work
Work
COPYRIGHT © 1999 CANON INC.
Remarks
Release rolls
Remarks
Drum unit
Light-blocking
sheet
Take care not to damage the drum.
Slide the drum unit straight along the rails
into the copier.
The front cover may be left open.
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)