Canon NP6317 Service Manual page 168

CHAPTER 10 TROUBLESHOOTING
2. Leading Edge Registration
Make adjustments in the service mode (C2) so that the distance shown is 10.0 ±1.5 mm when
the test sheet is copied in DIRECT.
Note:
Adjust the leading edge non-reproduced area before making this adjustment.
A higher setting in the service mode (C2) increases the leading edge margin.
3. Side-to-Side Registration
a. Cassette Feeding
The standard near side registration on a DIRECT copy of the test sheet is 10.0 ±2 mm.
Loosen the two screws, and adjust the latch assembly for the cassette found on the back of the
bottom plate by sliding it.
10-4
Figure 10-203
10 ±2 mm
Figure 10-204
Screws
Feeder release
lever
Cover
Figure 10-205
COPYRIGHT © 1999 CANON INC.
10.0 ±1.5 mm
0
2
4
6
8
10
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)