Canon NP6317 Service Manual page 126

CHAPTER 6 FIXING SYSTEM
11. Attaching the Upper Separation
Claw
Attach the upper separation claw as de-
taching it but in reverse order with the follow-
ing in mind.
a. Make sure that the boss on the upper sepa-
ration claw is in contact with the mount as
shown in Figure 6-220.
b. Make sure that the upper separation claw
assembly is fully toward the rear. If a
scratch is noted on the upper fixing roller,
move the upper separation claw assembly
about 4 mm toward the front.
6-14
COPYRIGHT © 1999 CANON INC.
Figure 6-220
4mm
Figure 6-221
CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)